MORE INFO
INSIDE MOUNT
• Shade will lay between inside perimeter of the window frame.
• For width:
Take measurements from the top, center & bottom of the window
frame, always staying on the inside edge.
• For length:
Take measurements from the left, center & right of the window
frame, always staying on the outside edge .
• Use smallest measurement of the three areas when placing order.
OUTSIDE MOUNT
• Measure the outside perimeter of the window frame.
• For width & length:
Recommendation: always add 2” – 4” to your total measurement
(width & height) to make sure light does not show from behind the
Roman Shade.
NOTES
CLASSIC - L3-RM01
• Allows for sophisticated and modern appearance.
• Shade differentiates Classic from other shade styles.
• Please note that back pockets will slightly interrupt the pattern of the fabric.
• Banding available as an option, standard size is 2”.
FLAT FOLD - L3-RM02
• No horizontal seam on this style; perfect choice when using fabrics with large patterns because of
Support rods that allow it to fold neater and lie flatter than other flat shades.
• Banding available as an option, standard size is 2”.
• A slight threading may be noticed on the face of the shade, due to hand sewn cord rings.
HOBBLED - L3-RM03
• Fabric falls in soft folds at 6” intervals. Each fold has a hidden rod on the back for additional support.
• The fabric design may be interrupted when folded, take this into consideration when picking a fabric for your Hobbled Shade.
• Banding available as an option, standard size is 2”.
FRONT PLEAT - L3-RM04
• Enhances every pleat on the front of the shade.
• Maximum width 48”.
• Banding available as an option, standard size is 2”.
RELAXED - L3-RM05
• Shade lies flat when lowered and will always have a gentle, decorative, inverted arch at the bottom.
• All stitching to attach the cord rings are hand sewn into the fabric. A slight threading may be noticed on the front of the shade.
• Outside mount only.
• Manual adjustment may be needed to achieve the desired arch at the bottom.
• TDBU & cordless not available for this style.
• Banding & accessories not available on this type of shade.
• Minimum width 24”.
• NOTE: Relaxed Roman Shades are more often used in a decorative setting, not recommended for
frequent use.
BANDED OPTIONS FOR ROMAN SHADES
• Along fabrics edge.
• Inset 2” from edge.
• Specify placement: vertical, bottom, or both.
STANDARD SPECIFICATIONS FOR ROMAN SHADES
• Standard cords on back with standard white tassels.
• Shades with back cords come without valances.
• Headrail size: 1” – ½” depth x ¾” height.
• Headrail wrapping: matching fabric.
• Shade will be located on the front of the headrail.
• Controls concealed behind the shade.
• A valance can be added as an option for back cords shades.
• White privacy lining for all Roman Shades.
• Lining is not available for sheer fabrics.
• Color coordinating cords & clear tassels will only be available for front cord shades.
• All shades over 96” width will have a pulley control.
• Shades are made from bottom to top, and patterns will be matched from the bottom of the shade to the top.
SHEER SHADES
• Only available in flat fold & relaxed style.
• Sheer shades are unlined.
• Flat Fold style is not available in cordless.
• Relaxed style is not available in TDBU & cordless.
INSTALLATION OPTIONS
• 2” screws will be provided for all inside mounted Roman Shades.
• “L” brackets will be provided for all outside mounted Roman Shades.
LIFT SYSTEM OPTIONS
CORDS FORWARD
• Maximum width & length:
width: 120”, length: 120”
• Cords back – valance not included (standard); available as an option.
• Return not included.
• ¼” deduction will be taken at the factory.
• Cords forward – valance included.
• Clear tassels.
• Cords: color will be matched as closely as possible.
CHAIN CONTROL OPTION INSIDE MOUNT
• Maximum width & length
width: 120”, length: 120”
• Minimum length: 18”
• Cords back – valance not included (standard); available as an option.
• Cords forward – valance included.
• ¼” deduction will be taken at the factory.
• Head board width: 3”.
CHAIN CONTROL OPTION OUTSIDE MOUNT
• Cords back valance not included; available as an option.
• Outside mount / cords back: 6” returns.
• Inside mount – no returns provided.
• Shade will be exact net measurement provided.
• Headrail will be 1” wider than shade for outside mount with cords
forward only.
• 3” head board used on all sizes.
• Minimum: 18”L
• Maximum: 120”W, 120”L
CORDLESS
• Maximum width & length:
width: 84”, length: 84”
• Minimum width & length:
width: 24”, length: 18”
• Outside mount / 6” returns.
• Headrail will be 1” wider than shade for outside mount with cords
forward only.
• Inside mount – ¼” deduction will be taken at the factory.
TOP DOWN BOTTOM UP
• Maximum width & length:
width: 120”, length: 120”
• Adjustable 1-2” only on top down bottom up option.
• Valance included.
• Inside mount – return not included.
• ¼” deduction will be taken at the factory.
• Outside mount.
• Headrail will be 1” wider than shade for outside mount with cords forward only.
• Relaxed style not available.
• Top-down is controlled by the left cord/bottom-up is controlled by the right cord.
• NOTE: white cords used only.
2 ON 1 HEADRAIL
• Minimum total width: 48”
• Chain control option/cord lock.
• Cords back – valance not included.
• Cords forward – valance included.
• Standard gap between Roman Shades: ¼”.
• NOTE: when a valance is included, fabrics will join in the middle of the
Roman Shade.
UP-ENDED HEADRAIL
• Headrail: 1¼”H x ¾”D
• Chain control option, top down bottom up; cordless or motorized lift systems
not available.
• 2” Screws are included for outside/inside mount. “L” brackets not available.
• NOTE: headrail may be turned up to 90 degrees to fit slim spaces
MOTORIZED
• Maximum width & length
width: 84”, length: 84”
• Minimum width & length
width: 30”, length: 18”
LINING OPTIONS
PRIVACY LINING
• Acts as a shield between fabric and sunlight.
• 65% polyester / 35% cotton.
• Color: white (standard) / ivory (optional).
• 54” width.
PRIVACY LINING
• Acts as a shield, blocking out 100% sunlight.
• 100% polyester.
• 3 pass acrylic foam backing.
• 54” width.
• There is a possibility light may still filter through perforations of fabric.
